Reference 21
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide 325
Upgrading to an MSO
A license can be installed to activate the digital channels of an
oscilloscope that was not originally ordered as a mixed- signal oscilloscope
(MSO). A mixed signal oscilloscope has analog channels plus 16
time- correlated digital timing channels.
For information about upgrading your oscilloscope through licensing,
contact your local Agilent Technologies representative or see
"www.agilent.com/find/3000X- Series".
Software and Firmware Updates
From time to time Agilent Technologies releases software and firmware
updates for its products. To search for firmware updates for your
oscilloscope, direct your web browser to
"www.agilent.com/find/3000X- Series- sw".
To view the currently installed software and firmware press [Help] > About
Oscilloscope.
Once you have downloaded a firmware update file, you can place it on a
USB storage device and load the file using File Explorer (see "File
Explorer" on page 287), or you can use the Instrument Utilities page of
the oscilloscope's web interface (see "Instrument Utilities" on page 311).
Binary Data (.bin) Format
The binary data format stores waveform data in binary format and
provides data headers that describe that data.
Because the data is in binary format, the size of the file is approximately
5 times smaller than the ASCII XY format.
If more than one source is on, all displayed sources will be saved, except
math functions.
To Next Page
Loading...
