I2C/SPI Triggering and Serial Decode 24
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide 379
4 Press the Bits softkey to open the SPI Bits Search Menu.
5 In the SPI Bits Search Menu, use the Words softkey to specify the
number of words in the data value; then, use the remaining softkeys to
enter the hex digit values.
For more information on searching data, see "Searching Lister Data" on
page 126.
For more information on using the [Navigate] key and controls, see
"Navigating the Time Base" on page 58.
To Next Page
Loading...
