Chapter 2 Overview
8
N: N terminal of the power input line;
DUT POWER: input of DUT power, to connect mains power or inverter power;
②PLC: Support PLC control to start, stop, change the test group and other operations. For
definitions of ports, refer to Section 5.3;
③ALARM: to connect alarm LED (three colors). For definitions of ports, refer to Section
5.1;
④BAR CODE INPUT: to connect barcode scanner with RS-232 port for barcode input.
⑤REMOTE: to connect remote control box. Support start/stop operation. For definitions
of ports, refer to Section 5.2;
⑥Communication port: optional RS232/RS485/GPIB/LAN COM.
⑦External power supply communication interface:
can be connected AN97 / AN16 series inverter power supply and other external devices.
⑧SINGAL INPUT: quick select. For definitions of ports, refer to Section 5.8;
SINGAL OUTPUT: programmable digital output, set on the screen;
⑨Input Power: power socket, 220V/50Hz, 10A fuse.
To Next Page
Loading...
