Chapter 3 Unpack and Installation
16
By default, he has all permissions, and the permissions can be modified, and the password can be
modified. This user belongs to the production staff and can save the data to the database during the
test.
If you are using this software for the first time, please log in with the "root" user, the
password is blank, and modify the password for the user "root" after login to ensure safe use.
When you successfully complete the login procedure, the main interface of the ESRS system
software as shown in Figure 3-2-3 will appear.
Figure 3-2-3 Main interface
The main interface of the ESRS system software is composed of 6 function buttons, which
are described as follows:
1) Product test Perform the edited test process, display the test process and results;
2) Program editing Edit the test process and various parameters; (in query mode, this function
is not available)
3) Report generation According to the selected query conditions, the test result data is
generated into a report;
4) Hardware configuration Add and delete hardware devices and configure each instrument in
the system;
5) MES configuration related to configuration database;
6) System management Set the permissions of each user, view the test log of each registrant,
and set the effective system configuration and test process;
To Next Page
Loading...
