206
Settings and Adjustments
Station programming
4
■ Delay Time [sec]
*1 Indicates a required field. Use the default values, unless a change is necessary.
■ Transfer Destination List
■ Re-Transfer Destination
Entry Description Settings Default values
Delay Time [sec]
*1
Set the delay time between receiving and
transferring a call.
1 - 300 sec 30 sec
Entry Description Settings Default values
Station Number Configure the transfer destination station
(Number) for absent transfer. Up to 10 transfer
destination stations can be configured.
However, if station making the outgoing call is
IX-MV, IX-DA(-*), or IX-BA, the transfer will be
made only to the station entered in "No.01."
IXW-MA cannot be configured as a transfer
destination.
3-32 digits -
Important
• Do not configure multiple VoIP phones as transfer destinations. If multiple VoIP phones are configured, calls will be transferred
to only one VoIP phone.
Entry Description Settings Default values
Re-Transfer Destination Configure the transfer destination station
(number) when performing delay re-transfer for
a transferred call. Only a single station can be
configured as the transfer destination. However,
if the station making the outgoing call is IX-MV,
IX-DA(-*), or IX-BA, the call will be received
without re-transferring. IXW-MA cannot be
configured as a transfer destination.
3-32 digits -
To Next Page
Loading...
Need help?
General
