Alcatel-Lucent 7210 SAS M Configuration Guide

System Commands
Page 506 7210 SAS M, T, X, R6 Basic System Configuration Guide
Context debug>system
Description This command enables and configures debugging for NTP.
The no form of the command disables debugging for NTP.
Parameters router-name — Base, management
Default Base
ip-int-name — maximum 32 characters; must begin with a letter. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English