Subscriber Services
7210 SAS-X, R6 OS Services Guide Page 119
remote-mepid
Syntax [no] remote-mepid mep-id
Context config>>domain>association
Description This command configures the remote maintenance association end point (MEP) identifier.
Parameters mep-id — Maintenance association end point identifier of a remote MEP whose information from the
MEP database is to be returned.
Values 1 — 8191
slm
Syntax slm
Context config>eth-cfm
Description This is the container that provides the global configuration parameters for ITU-T Synthetic Loss
Measurement (ETH-SL).
inactivity-timer
Syntax inactivity-timer timer
[no] inactivity-timer
Context config>eth-cfm>slm
Description The time the responder keeps a test active. The time between packets exceed this values within a test
the responder marks the previous test as complete. The timer treats any new packets from a peer with
the same test-id, source-mac and MEP-ID as a new test responding with the sequence number one.
Default 100 seconds
Parameters timer — Specifies the amount of time in seconds.
Values 10 100
To Next Page
Loading...
