Alcatel-Lucent 7210 SAS-X - Modifying Sdps

Services
7210 SAS-X, R6 OS Services Guide Page 83
Modifying SDPs
To access a specific SDP, you must specify the SDP ID. To display a list of SDPs, use the show
service sdp command. Enter the parameter, such as description , far-end , and lsp , and then enter the
new information.
NOTE: Once created, you cannot modify the SDP encapsulation type.
CLI Syntax: config>service# sdp sdp-id
Example : config>service# sdp 79
config>service>sdp# description “Path-to-107”
config>service>sdp# shutdown
config>service>sdp# far-end “10.10.10.107”
config>service>sdp# path-mtu 1503
config>service>sdp# no shutdown