Service Management Tasks
Page 332 7210 SAS-X, R6 OS Services Guide
Disabling a Management VPLS
You can shut down a management VPLS without deleting the service parameters.
When a management VPLS is disabled, all associated user VPLS services are also disabled (to
prevent loops). If this is not desired, first un-manage the user’s VPLS service by removing them
from the managed-vlan-list.
CLI Syntax: config>service
vpls service-id
shutdown
Example
:
config>service# vpls 1
config>service>vpls# shutdown
config>service>vpls# exit
To Next Page
Loading...
