Configuring a VPRN Service with CLI
Page 720 7210 SAS-X OS Services Guide
Deleting a VPRN Service
An VPRN service cannot be deleted until SAPs and interfaces are shut down and deleted. If
protocols and/or a spoke-SDP are defined, they must be shut down and removed from the
configuration as well.
Use the following CLI syntax to delete a VPRN service:
CLI Syntax: config>service#
[no] vprn service-id [customer customer-id]
shutdown
[no] interface ip-int-name
shutdown
[no] sap sap-id]
[no] bgp
shutdown
[no] spoke-sdp sdp-id
[no] shutdown
To Next Page
Loading...
