Alcatel-Lucent 7210 SAS-X - Configuring IES Components; Configuring an IES Service

Configuring an IES Service with CLI
Page 638
Configuring IES Components
Use the CLI syntax to configure the following entities:
• Configuring an IES Service on page 638
• Configuring IES Interface Parameters on page 639
→ Configuring SAP Parameters on page 640
→ Configuring VRRP on page 640
Configuring an IES Service
Use the following CLI syntax to create an IES service:
The following example displays a basic IES service configuration.
A:ALA-48>config>service#
----------------------------------------------
...
ies 1001 customer 1730 create
description "to-internet"
no shutdown
exit
----------------------------------------------
A:ALA-48>config>service#