Alcatel-Lucent 7210 SAS-X - Deleting a VPLS Service; Disabling a VPLS Service

Virtual Private LAN Services
7210 SAS-X, R6 OS Services Guide Page 333
Deleting a VPLS Service
A VPLS service cannot be deleted until SAPs and SDPs are unbound (deleted), interfaces are
shutdown, and the service is shutdown on the service level.
Use the following CLI syntax to delete a VPLS service:
CLI Syntax: config>service
[no] vpls service-id
shutdown
[no] spoke-sdp sdp-id
shutdown
sap sap-id
no sap sap-id
shutdown
Disabling a VPLS Service
You can shut down a VPLS service without deleting the service parameters.
CLI Syntax: config>service> vpls service-id
[no] shutdown
Example : config>service# vpls 1
config>service>vpls# shutdown
config>service>vpls# exit