Alcatel-Lucent 7210 SAS-X - Basic Configurations; Common Configuration Tasks

Configuring a VLL Service with CLI
Page 166 7210 SAS-X, R6 OS Services Guide
Basic Configurations
• Creating an Epipe Service on page 168
• Using Spoke SDP Control Words on page 178
• Configuring VLL Resilience on page 181
Common Configuration Tasks
This section provides a brief overview of the tasks that must be performed to configure the VLL
services and provides the CLI commands.
• Associate the service with a customer ID.
• Define SAP parameters
→ Optional - select ingress QoS policies (configured in the config>qos context).
→ Optional - select accounting policy (configured in the config>log context).
• Define spoke SDP parameters .
• Enable the service.