Alcatel-Lucent 7210 SAS-X - Creating an Epipe Service

Configuring a VLL Service with CLI
Page 168 7210 SAS-X, R6 OS Services Guide
Creating an Epipe Service
Use the following CLI syntax to create an Epipe service.
CLI Syntax: config>service# epipe service-id [customer customer-id] [cre-
ate] [vpn vpn-id]
description description-string
no shutdown
CLI Syntax: For 7210 SAS-R6 and X devices:
epipe service-id [customer customer-id] [create] [vpn vpn-
id][vc-switching] [svc-sap-type {any|qinq-inner-tag-preserve}]
description description-string
no shutdown
The following displays an Epipe configuration example:
A:ALA-1>config>service# info
epipe 1 customer 1 vpn 1 vc-switching create
description "Default epipe description for service id 1"
spoke-sdp 1:1 vc-type vlan create
description "Description for Sdp Bind 1 for Svc ID 1"
A:ALA-1>config>service# info