Alcatel-Lucent 7210 SAS-X - VLL Services

VLL Services Command Reference
Page 188 7210 SAS-X, R6 OS Services Guide
Epipe SAP Configuration Commands
config
— service
— epipe service-id [customer customer-id] [create] [vpn vpn-id][svc-sap-type { any | qinq-
inner-tag-preserve} ]
— sap sap-id [no-endpoint] [create] with-aggregate-meter
— sap sap-id [endpoint endpoint-name] [create]
— no sap sap-id
— accounting-policy acct-policy-id
— no accounting-policy acct-policy-id
— [no] collect-stats
— description description-string
— no description
— eth-cfm
— [no] ais-enable
— [no] mep mep-id domain md-index association ma-index
[direction {up | down}]
— [no] ais-enable
— [no] client-meg-level [[level [level ...]]
— [no] interval {1 | 60}
— [no] priority priority-value
— [no] ccm-enable
— [no] ccm-ltm-priority priority
— [no] description
— [no] eth-test-enable
— [no] test-pattern {all-zeros | all-ones} [crc-
enable]
— [no] fault-propagation-enable {use-if-tlv | suspend-
ccm}
— [no] mac-address mac-address
— [no] one-way-delay-threshold seconds
— mip [mac mac address]
— mip default-mac
— no mip
— mep
— [no] ccm-enable
— ccm-ltm-priority priority
— no ccm-ltm-priority
— [no] eth-test-enable
— test-pattern {all-zeros | all-ones} [crc-enable]
— no test-pattern
— low-priority-defect {allDef | macRemErrXcon |
remErrXcon | errXcon | xcon | noXcon}
— mac-address mac-address
— no mac-address
— [no] shutdown
— egress
— agg-rate-limit agg-rate
— no agg-rate-limit
— filter [ip ip-filter-id]
— filter [ ipv6 ipv6 -filter-id]
— filter [mac mac-filter-id] (app
— no filter [ip ip-filter-id] [ ipv6 ipv6 -filter-id] [mac
mac-filter-id]
— ingress