Alcatel-Lucent 7210 SAS-X - Service Management Tasks; Modifying VPRN Service Parameters

Virtual Private Routed Network Services
7210 SAS-X OS Services Guide Page 719
Service Management Tasks
This section discusses the following service management tasks:
• Modifying VPRN Service Parameters on page 719
• Deleting a VPRN Service on page 720
Modifying VPRN Service Parameters
Use the CLI syntax to modify VPRN parameters (VPRN Services Command Reference on page
723).
The following example displays the VPRN service creation output.
*A:ALA-1>config>service# info
----------------------------------------------
...
vprn 1 customer 1 create
shutdown
vrf-import "vrfImpPolCust1"
vrf-export "vrfExpPolCust1"
maximum-routes 2000
autonomous-system 10000
route-distinguisher 10001:1
interface "to-ce1" create
address 10.1.1.1/24
sap 1/1/10:1 create
exit
exit
static-route 6.5.0.0/24 next-hop 10.1.1.2
bgp
router-id 10.0.0.1
group "to-ce1"
export "vprnBgpExpPolCust1"
peer-as 65101
neighbor 10.1.1.2
exit
exit
exit
spoke-sdp 2 create
exit
exit
...
----------------------------------------------
*A:ALA-1>config>service>vprn#