Alcatel-Lucent 7210 SAS-X - Common Configuration Tasks

Configuring a VPLS Service with CLI
Page 294 7210 SAS-X, R6 OS Services Guide
Common Configuration Tasks
This section provides a brief overview of the tasks that must be performed to configure both local
VPLS services and provides the CLI commands.
For VPLS services:
1. Associate VPLS service with a customer ID
2. Define SAPs:
− Select node(s) and port(s)
− Optional — Select QoS policies other than the default (configured in
config>qos context)
− Optional — Select filter policies (configured in config>filter context)
− Optional — Select accounting policy (configured in config>log context)
3. Modify STP default parameters (optional) (see VPLS and Spanning Tree Protocol on page
248)
4. Enable service