Alcatel-Lucent 7210 SAS-X - Deleting Sdps

Service Management Tasks
Page 84 7210 SAS-X, R6 OS Services Guide
Deleting SDPs
The no form of the sdp command removes an SDP ID and all associated information. Before an
SDP can be deleted, the SDP must be shutdown and removed (unbound) from all customer
services where it is applied.
CLI Syntax: config>service# no sdp 79
Example : config>service# epipe 5 spoke-sdp 79:5
config>service>epipe>sdp# shutdown
config>service>epipe>sdp# exit
config>service>epipe# exit
config>service# no sdp 79