VPRN Services Command Reference
Page 734 7210 SAS-X OS Services Guide
OSPF Configuration Commands
config
— service
— vprn service-id [customer customer-id]
— no vprn service-id
— [no] ospf
— [no] area area-id
— area-range ip-prefix/mask [advertise | not-advertise]
— no area-range ip-prefix/mask
— [no] blackhole-aggregate
— [no] interface ip-int-name [secondary]
— [no] advertise-subnet
— authentication-key [authentication-key | hash-key]
[hash | hash2]
— no authentication-key
— authentication-type {password | message-digest}
— no authentication-type
— bfd-enable[remain-down-on-failure]
— no bfd-enable
— dead-interval seconds
— no dead-interval
— helper-disable
— hello-interval seconds
— no hello-interval
— interface-type {broadcast | point-to-point}
— no interface-type
— message-digest-key key-id md5 [key | hash-key]
[hash | hash2]
— no message-digest-key key-id
— metric metric
— no metric
— mtu bytes
— no mtu
— [no] passive
— priority number
— no priority
— retransmit-interval seconds
— no retransmit-interval
— [no] shutdown
— transit-delay seconds
— no transit-delay
— [no] nssa
— area-range ip-prefix/mask [advertise | not-advertise]
— no area-range ip-prefix/mask
— originate-default-route [type-7]
— no originate-default-route
— [no] redistribute-external
— [no] summaries
— [no] sham-link ip-int-name ip-address
— authentication-key [authentication-key | hash-key]
[hash | hash2]
— no authentication-key
— authentication-type {password | message-digest}
— no authentication-type