Alcatel-Lucent 7210 SAS-X - Bgp Configuration Commands

VPRN Services Command Reference
Page 730 7210 SAS-X OS Services Guide
BGP Configuration Commands
config
— service
— vprn service-id [customer customer-id]
— no vprn service-id
— [no] bgp
— [no] advertise-inactive
— [no] aggregator-id-zero
— always-compare-med {zero | infinity}
— no always-compare-med
— [no] as-path-ignore
— auth-keychain name
— authentication-key [authentication-key | hash-key] [hash | hash2]
— no authentication-key
— [no] connect-retry seconds
— [no] damping
— description description-string
— no description
— [no] disable-4byte-asn
— disable-capability-negotiation
— no disable-capability-negotiation
— disable-communities [standard] [extended]
— no disable-communities
— [no] disable-fast-external-failover
— [no] enable-peer-tracking
— export policy-name [policy-name...(upto 5 max)]
— no export
— family [ipv4]
— no family
— hold-time seconds [strict]
— no hold-time
— import policy-name [policy-name...(up to 5 max)]
— no import
— keepalive seconds
— no keepalive
— local-preference ip-address
— no local-preference
— local-as
— local-as as-number [private]
— no local-as
— local-preference local-preference
— no local-preference
— loop-detect {drop-peer | discard-route | ignore-loop| off}
— no loop-detect
— med-out {number | igp-cost}
— no med-out
— min-as-origination seconds
— no min-as-origination
— min-route-advertisement seconds
— no min-route-advertisement
— multihop ttl-value
— no multihop
— next-hop-self
— no next-hop-self