VLL Service Configuration Commands
Page 212 7210 SAS-X, R6 OS Services Guide
Service Filter and QoS Policy Commands
egress
Syntax egress
Context config>service>epipe>spoke-sdp
config>service>epipe>sap
Description This command enables the context to configure egress SAP parameters.
force-vlan-vc-forwarding
Syntax [no] force-vlan-vc-forwarding
Context config>service>epipe>spoke-sdp
config>service>vpls>spoke-sdp
Description This command forces vc-vlan-type forwarding in the data path for spoke which have either vc-type.
This comand is not allowed on vlan-vc-type SDPs.
The no version of this command sets default behavior.
Default Per default this feature is disabled
ingress
Syntax ingress
Context config>service>epipe>sap
Description This command enables the context to configure ingress SAP Quality of Service (QoS) policies.
If no sap-ingress QoS policy is defined, the system default sap-ingress QoS policy is used for ingress
processing.
agg-shaper-rate
Syntax agg-shaper-rate cir cir-rate [pir pir-rate]
no agg-shaper-rate
Context config> service> vpls> sap> ingress
config> service> vprn> sap> ingress
config> service> ies> sap> ingress
Description This command allows user to specify the aggregate rate for the SAP shaper. The aggregate SAP
To Next Page
Loading...
