Alcatel-Lucent 7210 SAS-X - Page 169

Virtual Leased Line Services
7210 SAS-X, R6 OS Services Guide Page 169
Configuring Epipe SAP Parameters
A default QoS policy is applied to each ingress SAP. Additional QoS policies can be configured in
the config>qos context. Filter policies are configured in the config>filter context and
explicitly applied to a SAP. There are no default filter policies.
Use the following CLI syntax to create:
• Local Epipe SAPs on page 170
• Distributed Epipe Service on page 172
Epipe S AP
CLI Syntax: config>service# epipe service-id [customer customer-id]
sap sap-id
accounting-policy policy-id
collect-stats
description description-string
no shutdown
egress
filter {ip ip-filter-name | mac mac-filter-name}
ingress
filter {ip ip-filter-name | mac mac-filter-name}
qos policy-id