Alcatel-Lucent 7210 SAS-X - Page 127

Virtual Leased Line Services
7210 SAS-X, R6 OS Services Guide Page 127
The following is the example of an Epipe service with QinQ SAP and dot1q SAP. In the example
below, note that the Dot1q SAP's (1/1/4:45) VLAN value '45', matches the inner tag VLAN value
specified with QinQ SAP (1/1/3:10.45).
*A:7210>config>service# info
----------------------------------------------
epipe 10 svc-sap-type qinq-inner-tag-preserve customer 1 create
sap 1/1/3:10.45 create
no shutdown
exit
sap 1/1/4:45 create
no shutdown
exit
no shutdown
exit
----------------------------------------------
The following is the example of an Epipe service with 2 QinQ SAPs. In the example below, note
that the inner tag of both QinQ SAPs matches and is set to a value of '45'.
*A:7210>config>service# info
-----------------------------------------------------------------------------------------
-
epipe 10 svc-sap-type qinq-inner-tag-preserve customer 1 create
sap 1/1/3:10.45 create
no shutdown
exit
sap 1/1/4:200.45 create
no shutdown
exit
no shutdown
exit
-----------------------------------------------------------------------------------------
-----