Virtual Leased Line Services
7210 SAS-X, R6 OS Services Guide Page 161
• A “connection profile” is used to specify either range of VLAN IDs or individual VLANs
to be grouped together in a single SAP.
• No Dot1q default sap is allowed on the same access port as the one on which a SAP with
a range is configured.
• Multiple “connection-profile” can be used per port or Lag as long as the VLAN value
specified by each of them does not overlap. The number of VLAN ranges available per
port/LAG is limited. The available number must be shared among all the SAPs on the
port/LAG.
• “Connection-profile”, associated with a SAP cannot be modified. To modify a connection
profile, it must be removed from all SAPs that are using it.
To Next Page
Loading...
