Virtual Private LAN Services
7210 SAS-X, R6 OS Services Guide Page 375
prefix
Syntax prefix low-order-vsi-id
no prefix
Context config>service>vpls>bgp-ad>vsi-id
Description This command specifies the low-order 4 bytes used to compose the Virtual Switch Instance Identifier
(VSI-ID) to use for NLRI in BGP auto-discovery in this VPLS service.
If no value is set, the system IP address will be used.
Default no prefix
Parameters low-order-vsi-id — Specifies a unique VSI ID.
Values 0— 4294967295
Please refer to the Virtual Private LAN Service on page 231 for .
To Next Page
Loading...
