Alcatel-Lucent 7210 SAS-X - Page 388

Virtual Private LAN Services
Page 388 7210 SAS-X, R6 OS Services Guide
Description This command enables the generation and the reception of AIS messages.
client-meg-level
Syntax client-meg-level [[level [level ...]]
no client-meg-level
Context config>service>vpls>mesh-sdp>eth-cfm>mep>ais-enable
config>service>epipe>spoke-sdp>eth-cfm>mep>ais-enable
Description This command configures the client maintenance entity group (MEG) level(s) to use for AIS message
generation. Up to 7 levels can be provisioned with the restriction that the client MEG level must be
higher than the local MEG level.
Parameters level — Specifies the client MEG level.
Values 1 — 7
Default 1
interval
Syntax interval {1 | 60}
no interval
Context config>service>vpls>mesh-sdp>eth-cfm>mep>ais-enable
config>service>epipe>spoke-sdp>eth-cfm>mep>ais-enable
Description This command specifies the transmission interval of AIS messages in seconds.
Parameters 1 | 60 — The transmission interval of AIS messages in seconds.
Default 1
priority
Syntax priority priority-value
no priority
Context config>service>vpls>mesh-sdp>eth-cfm>mep>ais-enable
config>service>epipe>spoke-sdp>eth-cfm>mep>ais-enable
Description This command specifies the priority of AIS messages originated by the node.
Parameters priority-value — Specify the priority value of the AIS messages originated by the node.