Alcatel-Lucent 7210 SAS-X - Page 430

Show, Clear, Debug Commands
Page 430 7210 SAS-X, R6 OS Services Guide
10 Down Down a - N/A - - - -----
b - N/A - - - -----
===============================================================================
Ethernet Tunnel MEP Defect Legend:
R = Rdi, M = MacStatus, C = RemoteCCM, E = ErrorCCM, X = XconCCM
*A:NS1015C0821>show#
Sample for 7210 SAS-R6 devices:
*A:7210SAS>show# eth-ring
===============================================================================
Ethernet Rings (summary)
===============================================================================
Ring Int Admin Oper Paths Summary Path States
ID ID State State a b
-------------------------------------------------------------------------------
1 - Up Up a - 1/1/3 1 b - 1/1/1 1 B U
10 - Up Up a - 1/1/3 10 b - 1/1/1 10 B U
30 - Up Up a - 1/1/3 30 b - 1/1/1 30 B U
===============================================================================
Ethernet Ring Summary Legend: B - Blocked U - Unblocked
*A:7210SAS>show#
Output Show Ethernet Ring — The following table describes show command output fields.
Label Description
Description
The ring description
Admin State
Displays the administrative state
Oper State
Displays the operational state
Node ID
Displays the node identifier
Guard Time
Displays the configured guard time
Max Revert time
Displays the configured maximum revert time
CCM Hold down time
Displays the configured CCM Hold down time
APS TX PDU
Displays the APS TX PDU information
Defect Status
Displays the defect status
RPL Node
Displays the RPL node information
Time to revert
Displays the configured time to revert
CCM Hold Up Time
Displays the configured CCM Hold up time