Show, Clear, Debug Commands
Page 468 7210 SAS-X, R6 OS Services Guide
Drop InProf : 0 0
Drop OutProf : 0 0
Egress Queue 7 (h1)
Fwd Stats : 0 0
Drop InProf : 0 0
Drop OutProf : 0 0
Egress Queue 8 (nc)
Fwd Stats : 0 0
Drop InProf : 0 0
Drop OutProf : 0 0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Service Endpoints
-------------------------------------------------------------------------------
Endpoint name : x
Description : (Not Specified)
Revert time : 0
Act Hold Delay : 0
Ignore Standby Signaling : false
Suppress Standby Signaling : true
Block On Mesh Fail : false
Tx Active : 1/1/3:64
Tx Active Up Time : 0d 01:31:46
Revert Time Count Down : N/A
Tx Active Change Count : 0
Last Tx Active Change : 05/19/2000 12:13:40
-------------------------------------------------------------------------------
Members
-------------------------------------------------------------------------------
SAP : 1/1/3:64 Oper Status: Up
===============================================================================
Endpoint name : y
Description : (Not Specified)
Revert time : 0
Act Hold Delay : 0
Ignore Standby Signaling : false
Suppress Standby Signaling : true
Block On Mesh Fail : false
Tx Active : 12:64
Tx Active Up Time : 0d 00:00:27
Revert Time Count Down : N/A
Tx Active Change Count : 105
Last Tx Active Change : 05/20/2000 12:32:15
-------------------------------------------------------------------------------
Members
-------------------------------------------------------------------------------
Spoke-sdp: 12:64 Prec:4 Oper Status: Up
Spoke-sdp: 24:64 Prec:4 Oper Status: Up
===============================================================================
===============================================================================
*A:DUT-B_sasx>show>service#
Sample Output (Split Horizon Group):
*A:SASX>show>service# id 1 all
===============================================================================