Alcatel-Lucent 7210 SAS-X - Page 479

VLL Show Commands
7210 SAS-X, R6 OS Services Guide Page 479
Sample Output
A:Dut-A# show service id 1101 base
===============================================================================
Service Basic Information
===============================================================================
Service Id : 1101 Vpn Id : 1101
Service Type : Epipe
Description : Default epipe description for service id 1101
Customer Id : 1
Last Status Change: 07/07/2009 18:13:43
Last Mgmt Change : 07/07/2009 14:39:14
Admin State : Up Oper State : Up
MTU : 1514
Vc Switching : False
SAP Count : 1 SDP Bind Count : 1
-------------------------------------------------------------------------------
Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier Type AdmMTU OprMTU Adm Opr
-------------------------------------------------------------------------------
sap:lag-4:1101 q-tag 9212 9212 Up Up
sdp:1409:1101 S(10.20.1.4) n/a 0 9186 Up Up
===============================================================================
A:Dut-A#
endpoint
Syntax endpoint [endpoint-name]
Context show>service>id
Description This command displays service endpoint information.
Parameters endpoint-name — Specifies the name of an existing endpoint for the service.
Sample Output
*A:Dut-A>show>service>id# endpoint
===============================================================================
Service 1501 endpoints
===============================================================================
Endpoint name : coreSide
Description : (Not Specified)
Revert time : 0
Act Hold Delay : 0
Standby Signaling Master : true
ISID
The 24 bit field carrying the service instance identifier associated with
the frame. It is used at the destination PE as a demultiplexor field.
Label Description (Continued)