Alcatel-Lucent 7210 SAS-X - Page 509

VPLS Show Commands
7210 SAS-X, R6 OS Services Guide Page 509
1/1/3:46 46 1 none 1 none Up Up
1/1/3:47 47 1 none 1 none Up Up
1/1/3:48 48 1 none 1 none Up Up
1/1/3:49 49 1 none 1 none Up Up
1/1/3:50 50 1 none 1 none Up Up
1/1/3:51 51 1 none 1 none Up Up
1/1/3:52 52 1 none 1 none Up Up
1/1/3:53 53 1 none 1 none Up Up
1/1/3:54 54 1 none 1 none Up Up
1/1/3:55 55 1 none 1 none Up Up
1/1/3:56 56 1 none 1 none Up Up
1/1/3:57 57 1 none 1 none Up Up
1/1/3:58 58 1 none 1 none Up Up
1/1/3:59 59 1 none 1 none Up Up
1/1/3:60 60 1 none 1 none Up Up
1/1/3:61 61 1 none 1 none Up Up
1/1/3:62 62 1 none 1 none Up Up
1/1/3:63 63 1 none 1 none Up Up
1/1/3:64 257 1 none 1 none Up Up
-------------------------------------------------------------------------------
Number of SAPs : 64
-------------------------------------------------------------------------------
===============================================================================
sdp
Syntax sdp [sdp-id | far-end ip-addr] [detail | keep-alive-history]
Context show>service>id
Description This command displays information for the SDPs associated with the service.
If no optional parameters are specified, a summary of all associated SDPs is displayed.
Parameters sdp-id — Displays only information for the specified SDP ID. An SDP is a logical mechanism that
ties a far-end 7210 SAS M to a particular service without having to specifically define far end
SAPs. Each SDP represents a method to reach a 7210 SAS M router.
Default All SDPs.
Values 1 — 17407
far-end ip-addr — Displays only SDPs matching with the specified system IP address of the far-end
destination 7210 SAS M router for the Service Distribution Point (SDP) that is the termination
point for a service.
Default SDPs with any far-end IP address.
detail — Displays detailed SDP information.
Output Show Service SDP — The following table describes show service-id SDP output fields.
Label Description
Sdp Id
The SDP identifier.