Alcatel-Lucent 7210 SAS-X - Page 516

Show, Clear, Debug Commands
Page 516 7210 SAS-X, R6 OS Services Guide
id
Syntax id service-id {all | arp | base | endpoint | fdb | interface | label | labels | sap | |
splithorizon-group | stp |mstp-configuration}
Context show>service
Description This command displays information for a particular service-id.
Parameters service-id — The unique service identification number that identifies the service in the service
domain.
Values service-id: 1 — 214748364
svc-name: A string up to 64 characters in length.
all — Display detailed information about the service.
base — Display basic service information.
endpoint — Display service endpoint information.
fdb — Display FDB entries.
labels — Display labels being used by this service.
mstp-configuration — - Display MSTP information.
sap — Display SAPs associated to the service.
sdp — Display SDPs associated with the service.
stp — Display STP information.
all
Syntax all
Context show>service>id
Description This command displays detailed information for all aspects of the service.
Output Show service ID all output — The following table describes the command output fields.
Label Description
Service Id
The service identifier.
VPN Id
The number which identifies the VPN.
Service Type
Specifies the type of service.
SDP Id
The SDP identifier.
Description
Generic information about the service.
Customer Id
The customer identifier.