EasyManua.ls Logo

Alcatel-Lucent 7210 SAS-X - Page 519

Alcatel-Lucent 7210 SAS-X
948 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VPLS Show Commands
7210 SAS-X, R6 OS Services Guide Page 519
Sample Output
Ignore Standby Sig : False Block On Mesh Fail: False
*A:DUT-B_sasx>show>service# id 255 all
===============================================================================
Service Detailed Information
===============================================================================
Service Id : 255 Vpn Id : 0
Service Type : VPLS
Description : (Not Specified)
Customer Id : 1
Last Status Change: 05/20/2000 12:36:10
Last Mgmt Change : 05/20/2000 12:36:10
Admin State : Up Oper State : Up
MTU : 1514 Def. Mesh VC Id : 255
MTU Check : Enabled
SAP Count : 0 SDP Bind Count : 2
Snd Flush on Fail : Disabled Host Conn Verify : Disabled
Uplink Type : MPLS
Propagate MacFlush: Disabled
-------------------------------------------------------------------------------Ser-
vice Destination Points(SDPs)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Sdp Id 12:255 -(1.1.1.1)
High priority
offered
The packets or octets count of the high priority traffic for the SAP.
For.InProf
The packets or octets count of the in-profile forwarded traffic for the
SAP.
For.OutProf
The number of out of profile traffic packets/octets forwarded.
Managed by Service
Specifies the service-id of the management VPLS managing this SAP.
Managed by MSTI
Specifies the MST instance inside the management VPLS managing
this SAP.
Last BPDU from
The bridge ID of the sender of the last BPDU received on this SAP.
Managed by SAP
Specifies the sap-id inside the management VPLS managing this SAP.
Prune state
Specifies the STP state inherited from the management VPLS.
Managed by Service
Specifies the service-id of the management VPLS managing this spoke
SDP.
Last BPDU from
The bridge ID of the sender of the last BPDU received on this SAP.
Managed by Spoke
Specifies the sap-id inside the management VPLS managing this spoke
SDP.
Prune state
Specifies the STP state inherited from the management VPLS.
Label Description (Continued)

Table of Contents