Alcatel-Lucent 7210 SAS-X - Page 529

VPLS Show Commands
7210 SAS-X, R6 OS Services Guide Page 529
Sample:
*A:7210SAS>show>service# id 1 l2pt detail
===============================================================================
L2pt details, Service id 1
===============================================================================
Service Access Points
-------------------------------------------------------------------------------
SapId L2pt- Admin Bpdu- Oper Bpdu-
termination translation translation
-------------------------------------------------------------------------------
1/1/1 stp cdp vtp dtp pagp udld disabled disabled
-------------------------------------------------------------------------------
Number of SAPs : 1
===============================================================================
===============================================================================
L2pt summary, Service id 1
===============================================================================
L2pt-term L2pt-term Bpdu-trans Bpdu-trans Bpdu-trans Bpdu-trans
enabled disabled auto disabled pvst stp
-------------------------------------------------------------------------------
SAP's 1 0 0 1 0 0
SDP's 0 0 0 0 0 0
-------------------------------------------------------------------------------
L2pt-term dis-
abled
Indicates that L2-PT-termination is disabled.
Bpdu-trans auto
Specifies the number of L2-PT PDU's are translated before being sent
out on a port or sap.
Bpdu-trans dis-
abled
Indicates that Bpdu-translation is disabled.
SAPs
Displays the number of SAPs with L2PT or BPDU translation enabled
or disabled.
SDPs
Displays the number of SDPs with L2PT or BPDU translation enabled
or disabled.
Total
Displays the column totals of L2PT entities.
SapId
The ID of the access point where this SAP is defined.
L2pt-termination
Indicates whether L2pt termination is enabled or disabled.
Admin Bpdu-trans-
lation
Specifies whether Bpdu translation is administratively enabled or dis-
abled.
Oper Bpdu-
translation
Specifies whether Bpdu translation is operationally enabled or dis-
abled.
SdpId
Specifies the SAP ID.
Label Description (Continued)