Alcatel-Lucent 7210 SAS-X - Page 537

VPLS Show Commands
7210 SAS-X, R6 OS Services Guide Page 537
Sample Output
A:Dut-A>show>service>id# sdp 1217:305
===============================================================================
Service Destination Point (Sdp Id : 1217:305)
===============================================================================
SdpId Type IP address Adm Opr I.Lbl E.Lbl
-------------------------------------------------------------------------------
1217:305 Spok 10.20.1.2 Up Up 130506 130516
-------------------------------------------------------------------------------
Number of SDPs : 1
===============================================================================
A:Dut-A>show>service>id# sdp 1217:305 detail
A:Dut-A>show>service>id#
===============================================================================
Service Destination Point (Sdp Id : 1217:305) Details
-------------------------------------------------------------------------------
Sdp Id 1217:305 -(10.20.1.2)
-------------------------------------------------------------------------------
Description : Default sdp description
SDP Id : 1217:305 Type : Spoke
VC Type : Ether VC Tag : n/a
Admin Path MTU : 0 Oper Path MTU : 9186
Far End : 10.20.1.2 Delivery : MPLS
Admin State : Up Oper State : Up
Acct. Pol : None Collect Stats : Disabled
Managed by Service : 300 Prune State : Not Pruned
Managed by Spoke : 1217:300
Ingress Label : 130506 Egress Label : 130516
Admin ControlWord : Not Preferred Oper ControlWord : False
Last Status Change : 07/07/2009 18:49:40 Signaling : TLDP
Last Mgmt Change : 07/07/2009 14:39:14 Force Vlan-Vc : Disabled
Last Mgmt Change : 07/07/2009 14:39:14
Flags : None
Peer Pw Bits : None
Peer Fault Ip : None
Oper State
The current status of the SDP.
Ingress Label
The label used by the far-end device to send packets to this device in
this service by this SDP.
Egress Label
The label used by this device to send packets to the far-end device in
this service by the SDP.
Last Changed
The date and time of the most recent change to the SDP.
Signaling
Specifies the signaling protocol used to obtain the ingress and egress
labels used in frames transmitted and received on this SDP.
Admin State
The administrative state of the Keepalive process.
Oper State
The operational state of the Keepalive process.
Label Description (Continued)