Alcatel-Lucent 7210 SAS-X - Page 543

VPLS Show Commands
7210 SAS-X, R6 OS Services Guide Page 543
mstp-configuration
Syntax mstp-configuration
Context show>service>id
Description This command displays the MSTP specific configuration data. This command is only valid on a
management VPLS.
Output Show Output — The following table describes the show all command output fields:
Label Description
Region Name
Displays the MSTP region name.
Region Revision
Displays the MSTP region revision.
MST Max Hops
Displays the MSTP maximum hops specified.
Instance
Displays the MSTP instance number.
Priority
Displays the MSTP priority.
Vlans mapped
Displays the VLAN range of the MSTP instance.