VPLS Show Commands
7210 SAS-X, R6 OS Services Guide Page 545
*A:7210SAS>show>service>id>dhcp# statistics
====================================================================
DHCP Global Statistics, service 1
====================================================================
Rx Packets : 416554
Tx Packets : 206405
Rx Malformed Packets : 0
Rx Untrusted Packets : 0
Client Packets Discarded : 0
Client Packets Relayed : 221099
Client Packets Snooped : 0
Client Packets Proxied (RADIUS) : 0
Client Packets Proxied (Lease-Split) : 0
Server Packets Discarded : 0
Server Packets Relayed : 195455
Server Packets Snooped : 0
DHCP RELEASEs Spoofed : 0
DHCP FORCERENEWs Spoofed : 0
====================================================================
*A:7210SAS>show>service>id>dhcp#
summary
Syntax summary [interface interface-name]
Context show>service>id>dhcp
Description Displays DHCP configuration summary information.
Parameters interface interface-name — Displays information for the specified IP interface.
Output Show DHCP Summary Output — The following table describes the output fields for DHCP
summary.
Server Packets
Relayed
The number of packets received from the DHCP server that were for-
warded.
Server Packets
Snooped
The number of packets received from the DHCP server that were
snooped.
Label Description
Label Description
Interface Name
Name of the router interface.
Arp Populate
Specifies whether or not ARP populate is enabled. 7210 SAS does not
support ARP populate.
Used/Provided
7210 SAS does not maintain lease state.
Info Option
Indicates whether Option 82 processing is enabled on the interface.
Admin State
Indicates the administrative state.