Alcatel-Lucent 7210 SAS-X - Page 61

Services
7210 SAS-X, R6 OS Services Guide Page 61
• An associated SDP for distributed services in the network mode. The SDPs are not
supported on the access uplink mode.
The following example provides an Epipe service configuration displaying the SDP and Epipe
service entities. SDP ID 1 was created with the far-end node 10.20.1.2. Epipe ID 101 was created
for customer ID 1 which uses the SDP ID 1.
A:ALA-7210M>config>service#
------------------------------------------
...
sdp 1 mpls create
description "Default sdp description"
far-end 10.20.1.2
lsp "lsp_1_to_B"
signaling tldp
no vlan-vc-etype
path-mtu 9194
no adv-mtu-override
keep-alive
shutdown
hello-time 10
hold-down-time 10
max-drop-count 3
timeout 5
no message-length
exit
no collect-stats
no accounting-policy
no shutdown
exit
...
epipe 101 customer 1 vpn 101 create
description "Default epipe description for service id 101"
service-mtu 9194
sap lag-2:101 create
description "Default sap description for service id 101"
no tod-suite
dot1ag
exit
ingress
qos 1
no filter
exit
spoke-sdp 101:101 vc-type ether create
no vlan-vc-tag
ingress
no vc-label
exit
egress
no vc-label
exit
no control-word
no
dot1ag
mep 1 domain 5 association 101 direction down
ccm-enable
no ccm-ltm-priority