Alcatel-Lucent 7210 SAS-X - Page 612

Show Commands
Page 612 7210 SAS-X, R6 OS Services Guide
Uplink Type: : MPLS
b-Vpls Id : 2 Oper ISID : 200
b-Vpls Status : Up
-------------------------------------------------------------------------------
Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier Type AdmMTU OprMTU Adm Opr
-------------------------------------------------------------------------------
sap:1/1/15:200 q-tag 1518 1518 Up Up
===============================================================================
*A:7210-SAS>show>service#
Sample output for B-VPLS service:
*A:7210-SAS>show>service# id 2 base
===============================================================================
Service Basic Information
===============================================================================
Service Id : 2 Vpn Id : 0
Service Type : b-VPLS
Description : (Not Specified)
Customer Id : 1
Last Status Change: 04/04/2001 22:13:57
Last Mgmt Change : 04/04/2001 22:13:57
Admin State : Up Oper State : Up
MTU : n/a
MTU Check : n/a
SAP Count : 1 SDP Bind Count : 0
Snd Flush on Fail : Disabled
Uplink Type: : MPLS
Oper Backbone Src : 00:25:ba:08:f6:20
i-Vpls Count : 1
Epipe Count : 1
-------------------------------------------------------------------------------
Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier Type AdmMTU OprMTU Adm Opr
-------------------------------------------------------------------------------
sap:1/1/2:2 q-tag 1518 1518 Up Up
===============================================================================
*A:7210-SAS>show>service#
fdb
Syntax fdb {info | mac ieee-address | sap sap-id | detail | endpoint endpoint}
[expiry] [pbb]
Context show>service>id
Description This command displays FDB entries for a given MAC address.