Services
7210 SAS-X, R6 OS Services Guide Page 71
• CFM can be enabled or disabled on a SAP or SDP bindings basis.
• The eight ETH-CFM levels are suggested to be broken up numerically between customer
7-5, service provider 4-3 and Operator 2-1. Level 0 is meant to monitor direct connections
without any MIPs and should be reserved for port-based facility MEPs. These can be
configured, deleted or modified.
• Down MEP and UP MEP with an MEP-ID on a SAP/SDP binding for each MD level can
be configured, modified, or deleted. Each MEP is uniquely identified by the MA-ID,
MEP-ID tuple.
→ MEP creation on a SAP is allowed only for Ethernet ports (with null, q-tags, qinq
encapsulations).
• MIP creation on a SAP for each MD level can be enabled and disabled. MIP creation is
automatic or manual when it is enabled. When MIP creation is disabled for an MD level,
the existing MIP is removed. For more information on MEP and MIP support, see MEP
and MIP Support on page 73
To Next Page
Loading...
