Alcatel-Lucent 7210 SAS-X - Page 715

Virtual Private Routed Network Services
7210 SAS-X OS Services Guide Page 715
VPRN BGP CLI Syntax
Use the CLI syntax to configure VPRN BGP parameters (BGP Configuration Commands on page
730).
The following example displays a VPRN BGP configuration:
*A:ALA-1>config>service# info
----------------------------------------------
...
vprn 1 customer 1 create
vrf-import "vrfImpPolCust1"
vrf-export "vrfExpPolCust1"
autonomous-system 10000
route-distinguisher 10001:1
auto-bind ldp
vrf-target target:10001:1
interface "to-ce1" create
address 11.1.0.1/24
sap 1/1/10:1 create
ingress
qos 100
exit
filter ip 6
exit
exit
exit
static-route 6.5.0.0/24 next-hop 10.1.1.2
bgp
router-id 10.0.0.1
group "to-cel"
export "vprnBgpExpPolCust1"
peer-as 65101
neighbor 10.1.1.2
exit
exit
exit
spoke-sdp 2 create
exit
no shutdown
exit
...
----------------------------------------------
*A:ALA-1>config>service#
Configuring a VPRN Interface
VPRN interface Interface names associate an IP address to the interface, and then associate the IP interface with a
physical port. The logical interface can associate attributes like an IP address, port, Link
Aggregation Group (LAG) or the system.
There are no default interfaces.