Virtual Private Routed Network Services
7210 SAS-X OS Services Guide Page 767
tod-suite
Syntax tod-suite tod-suite-name
no tod-suite
Context config>service>vprn>if>sap
Description This command applies a time-based policy (filter or QoS policy) to the SAP. The suite name must
already exist in the config>cron context.
Default no tod-suite
Parameters tod-suite-name — Specifies collection of policies (ACLs, QoS) including time-ranges that define the
full or partial behavior of a SAP or a subscriber. The suite can be applied to more than one SAP.
accounting-policy
Syntax accounting-policy acct-policy-id
no accounting-policy
Context config>service>vprn>if>sap
Description This command creates the accounting policy context that can be applied to an interface SAP or
interface SAP spoke SDP.
An accounting policy must be defined before it can be associated with a SAP.
If the policy-id does not exist, an error message is generated.
A maximum of one accounting policy can be associated with a SAP at one time. Accounting policies
are configured in the config>log context.
The no form of this command removes the accounting policy association from the SAP, and the
acccounting policy reverts to the default.
Default Default accounting policy.
Parameters acct-policy-id — Enter the accounting policy-id as configured in the config>log>accounting-policy
context.
Values 1 — 99
collect-stats
Syntax [no] collect-stats
Context config>service>vprn>if>sap
Description This command enables accounting and statistical data collection for either an interface SAP or
interface SAP spoke SDP, or network port. When applying accounting policies the data, by default, is
collected in the appropriate records and written to the designated billing file.
When the no collect-stats command is issued the statistics are still accumulated by the IOM cards.
However, the CPU will not obtain the results and write them to the billing file. If a subsequent
To Next Page
Loading...
