Virtual Private Routed Network Services
7210 SAS-X OS Services Guide Page 773
• Executing the host command with the same MAC address but a different IP address as an exist-
ing static host will create a new static host.
• If a static host has a MAC address assigned, the IP address for the host is optional (depending on
the features enabled on the SAP).
Values 8k static and dynamic hosts per 10G forwarding complex. per system.
subscriber sub-ident-string — Specify this optional parameter to specify an existing subscriber
identification profile to be associated with the static subscriber host. The subscriber identification
profile is configured in the config>subscr-mgmt>sub-ident-policy context. The subscriber
information is used by the VPRN SAP arp-reply-agent to determine the proper handling of
received ARP requests from subscribers.
• For VPRN SAPs with
arp-reply-agent
enabled with the optional sub-ident parameter, the
static subscriber host’s sub-ident-string is used to determine whether an ARP request
received on the SAP is sourced from a host belonging to the same subscriber as the
destination host. When both the destination and source hosts from the ARP request are
known on the SAP and the subscriber identifications do not match, the ARP request may be
forwarded to the rest of the VPRN destinations.
If the static subscriber host’s sub-ident string is not defined, the host is not considered to
belong to the same subscriber as another host on the SAP.
If source or destination host is unknown, the hosts are not considered to belong to the same
subscriber. ARP messages from unknown hosts are subject to anti-spoof filtering rules
applied at the SAP.
If sub-ident is not enabled on the SAP arp-reply-agent, subscriber identification matching is
not performed on ARP requests received on the SAP.
ARP requests are never forwarded back to the same SAP or within the receiving SAP’s split
horizon group.
sub-profile sub-profile-name — Specify this optional parameter to specify an existing subscriber
profile name to be associated with the static subscriber host. The subscriber profile is configured
in the config>subscr-mgmt>sub-profile context.
sla-profile sla-profile-name — Specify this optional parameter to specify an existing SLA profile
name to be associated with the static subscriber host. The SLA profile is configured in the
config>subscr-mgmt>sla-profile context.
frame-relay
Syntax frame-relay
Context config>service>vprn>if>sap
Description This command enables the context to configure Frame Relay parameters on the SAP.
To Next Page
Loading...
