VPRN Show Commands
7210 SAS-X OS Services Guide Page 853
2 300:2 Spok 10.0.0.13 Up 131070 131070
100 300:100 Mesh 10.0.0.13 Up 131069 131069
101 300:101 Mesh 10.0.0.13 Up 131068 131068
102 300:102 Mesh 10.0.0.13 Up 131067 131067
-------------------------------------------------------------------------------
Number of SDPs : 5
-------------------------------------------------------------------------------
*A:ALA-1#
A:ALA-48# show service sdp-using
===============================================================================
SDP Using
===============================================================================
SvcId SdpId Type Far End Opr State I.Label E.Label
-------------------------------------------------------------------------------
3 2:3 Spok 10.20.1.2 Up n/a n/a
103 3:103 Spok 10.20.1.3 Up 131067 131068
103 4:103 Spok 10.20.1.2 Up 131065 131069
105 3:105 Spok 10.20.1.3 Up 131066 131067
-------------------------------------------------------------------------------
Number of SDPs : 4
-------------------------------------------------------------------------------
A:ALA-48
service-using
Syntax service-using [epipe] [ies] [vpls] [vprn][sdp sdp-id] [customer customer-id]
Context show>service
Description Displays the services matching certain usage properties.
If no optional parameters are specified, all services defined on the system are displayed.
Parameters epipe — Displays matching Epipe services.
ies — Displays matching IES instances.
vpls — Displays matching VPLS instances.
vprn — Displays matching VPRN services.
sdp sdp-id — Displays only services bound to the specified SDP ID.
Default Services bound to any SDP ID.
Values 1 — 17407
customer customer-id — Displays services only associated with the specified customer ID.
Default Services associated with an customer.
Values 1 — 2147483647
Output Show Service Service-Using — The following table describes show service service-using output
fields:
To Next Page
Loading...
