Show, Clear, Debug Commands
Page 914 7210 SAS-X OS Services Guide
Sample Output
*A:ALA-12# show router 3 static-route
==============================================================================
Route Table
==============================================================================
IP Addr/mask Pref Metric Type Nexthop Interface Active
------------------------------------------------------------------------------
192.168.250.0/24 5 1 ID 10.200.10.1 to-ser1 Y
192.168.252.0/24 5 1 NH 10.10.0.254 n/a N
192.168.253.0/24 5 1 NH to-ser1 n/a N
192.168.253.0/24 5 1 NH 10.10.0.254 n/a N
192.168.254.0/24 4 1 BH black-hole n/a Y
==============================================================================
*A:ALA-12#
*A:ALA-12# show router 3 static-route 192.168.250.0/24
==============================================================================
Route Table
==============================================================================
IP Addr/mask Pref Metric Type Nexthop Interface Active
------------------------------------------------------------------------------
192.168.250.0/24 5 1 ID 10.200.10.1 to-ser1 Y
==============================================================================
*A:ALA-12#
*A:ALA-12# show router 3 static-route preference 4
=============================================================================
Route Table
==============================================================================
IP Addr/mask Pref Metric Type Nexthop Interface Active
------------------------------------------------------------------------------
192.168.254.0/24 4 1 BH black-hole n/a Y
==============================================================================
ID — The static route is an indirect route, where the
nexthop
for this
type of route is the non-directly connected next hop.
NH — The route is a static route with a directly connected next hop.
The
Nexthop
for this type of route is either the next hop IP address or
an egress IP interface name.
Next Hop
The next hop for the static route destination.
Interface
The egress IP interface name for the static route.
n/a — indicates there is no current egress interface because the
static route is inactive or a black hole route.
Active
N — The static route is inactive; for example, the static route is dis-
abled or the next hop IP interface is down.
Y — The static route is active.
No. of Routes:
The number of routes displayed in the list.
Label Description (Continued)
To Next Page
Loading...
