Alcatel-Lucent 7210 SAS-X - Page 919

VPRN Clear Commands
7210 SAS-X OS Services Guide Page 919
Description This command clears commands for a specific service.
Parameters service-id — The ID that uniquely identifies a service.
Values 1 — 2147483648
sap
Syntax sap sap-id {all | counters | stp}
Context clear>service>statistics
Description Clears SAP statistics for a SAP.
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
Command Descriptions on page 925 for command syntax.
spoke-sdp
Syntax spoke-sdp sdp-id:vc-id ingress-vc-label
Context clear>service>id
Description This command clears and resets the spoke SDP bindings for the service.
Parameters sdp-id — The spoke SDP ID to be reset.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID to be reset.
Values 1 — 4294967295
sdp
Syntax sdp sdp-id keep-alive
Context clear>service>statistics
Description This command clears keepalive statistics associated with the SDP ID.
Parameters sdp-id — The SDP ID for which to clear keepalive statistics.
Values 1 — 17407
counters
Syntax counters
Context clear>service>statistics>id
Description Clears all traffic queue counters associated with the service ID.