Alinco DR-735T/E - Basic Operations; CALL Channel Operation

30
Basic Operations
CALLChannel
This is a memory mode that allows the radio to quickly recall the assigned memory channel by simply
pressing a key, in VFO mode.
The default setting is 145.00MHz/435.00MHz as E-model, 145.000MHz/445.000MHz as T-model, and one
CALL channelis available on each band.
RecallingCALLChannel
1. Press and hold the V/M key in VFO mode.
The [CAL] icon appears on the display
and recalls the CALL channel.
In this mode, the main dial or UP/DOWN keys on the
microphone cannot change the frequency or memory
channels.
2. Press V/M key to exit CALL mode and
return to VFO mode.
NOTE
No scan functions are available in the CALL mode.
EditingCALLchanneldata
To store a desired setting in the CALL channel, follow
the memory mode programming instructions and assign
your selected settings to memory channel CAL. The call
channel data can be modified but cannot be eliminated
or hidden.