Alinco DR-735T/E - Advanced set mode; Advanced Set Mode Menus Overview

48
Set mode menu
Advancedsetmode
The DR-735T/E has an advanced set mode which is used for even more detailed customizations.
Available menus are mostly “set-and-forget” so this mode can be hidden.
Alistoftheadvancedsetmodemenusand
parameters
Menu Default Display Function
Default
Value
22 APO OFF Auto power off (APO) OFF
23 TOT OFF Time out timer (TOT) OFF
24 TOTP OFF TOT penalty OFF
25 TB 1750 Tone burst tones 1750
26 BCL - OF BCL - OF Busy channel lock out (BCLO) OFF OFF
27 S - MUTE OFF SUB band mute during transmission OFF
28 SCNLMP OFF Scan illumination OFF
29 FAN AUTO Cooling fan operation AUTO
30 VM 0 UM 0 Mid power output 0 0
31 HTR - N HTR - N Image signal rejection N N
32 TNC OFF TNC output OFF
33 MEMORY COMMON Memory channel mode selection COMMON
34 AFMUTE OFF Mutes SUB band RX while receiving in MAIN OFF
Tousetheadvancedsetmode
Press and hold H/L key until, appears on the display. Within 10 seconds, press H/L key 5 times in a
consecutive manner until beep is heard and a  icon appears on the display. The Menu 22 ~ 34 are added
in the set mode menu. After being completed the advanced setting, you may repeat the same operation to
hide the advanced menus. The saved values remain unchanged.