Alinco DR-735T/E - Auto-Dialer; To Program the Auto-Dialer; Transmitting the Stored Auto-Dialer Codes

67
Useful functions
Auto-dialer
This function is used to transmit a memorized DTMF codes, up to 16 digits in available
characters (0 to 9/ABCD#*-). The autodialer memory should be set in advance to operate.
ToProgramtheAuto-dialer:
1. Press and hold FUNC key then press MW
key.
2. Rotate left dial or press UP/DOWN keys
to select an autodialer memory channel.
3. Rotate right dial to select a code, and
push the right dial to save and move to
edit next code. Press MW key to move
left; the editing digit is displayed on the
right beneath.
Press and hold right dial to delete all
codes.
4. Press any key other than PWR, or dials to
save and exit.
NOTE
• A pause is shown as [-] .
• The shown codes will scroll toward left when excesses more than 6 digits.
TransmittingthestoredAuto-dialercodes
1. Select Auto-dialer channel.
Press and hold FUNC key then press MW
key. Rotate left dial or UP/DOWN keys to
select an autodialer memory channel.
2. While pressing and holding PTT, press
UP key. Selected codes will be
transmitted and the tones will be heard
from the speaker.