64
Useful functions
2. Rotate the right dial or UP/DOWN keys to
adjust RGB values as you like. Press the
right dial to switch R,G and B parameters.
The adjustable parameter flashes. The
change affects immediately. The color is
determined with the total combination of
R,G and B value so changing only 1 value
may not change the color drastically.
3. Press the left dial to save, press any key
other than dials, UP/DOWN key to exit.
When the new value is saved:
• CL0 ~ CL9 overwrites the old value.
• Flashing CLA ~ CLF channels will stay lit and
shows the programmed channels by rotating the dial.
To exit without saving , simply press FUNC key. A beep
is heard and returns to operating mode.
Detailed instruction will be available for downloads from
ALinco.com web site.
To Next Page
Loading...
