47
Chapter 3 Memory Features
3.1 Basics
This transceiver has three memory banks. 200 memory channels are available in each bank, for
a total of 600 channels. Each can retain different operating data such as receive and transmit
frequencies mode, tone etc. It is useful to store regularly used frequencies in the memory and
operate in the memory mode.
Features
Each Memory channel including 00-199 and P1, P2 channel can store following
parameters:
Transmit/receive frequency (including split frequency)•
Mode (SSB, CW, FM, AM, etc.)•
Filter (standard/narrow, not applicable in the FM mode)•
RF (preamplifi er/attenuator, not applicable in the FM mode)•
AGC (slow/fast, not applicable in the FM mode)•
NB (ON/OFF, not applicable in the FM mode)•
Tone (ON/OFF, for FM mode only)•
SPLIT (ON/OFF)•
Output power•
Skip channel setting•
Functions in the MEMORY mode
Memory frequency access protection (see page 73)•
Memory overwrite protection (see page 72)•
Memory-VFO transfer (see page 53)•
To Next Page
Loading...
